NC
VIDEO GALLERY Watch NC Machines in action! Below each
machine has a video, some features and a direct link to more detailed
information, features and options. The NC Videos are broken down
into categories for your convenience.
•
Portables: Take NC Portables on the jobsite or keep
them in your house.
• Table
Models:
All
Table Model Machines are equipped with table,
motor, and stand workstation.
• Tools:
N-C
set the standard for designing quality and durable Carvers, Shears and
precision Cutters.
• Upholstery & Netting Models:
Our netting
machinery minimizes downtime and part replacement.
• TAPES:
N-C Binding tapes, Yarns & Fringes make the most gorgeous finish in the
industry.
Happy watching!
NC Portables: Take NC Portables on the jobsite or keep
them in your house.
The PBS is a
single puller portable carpet binder suitable for any carpet edging
application. The PBS comes equipped with a complimentary carry case &
supply kit including bobbins, needles, thread, oil, and a screwdriver.
• Applies tape in One-pass
operation
• Binds all carpets and rugs
• Available in either
110/115V 60-cycle or • 220/2230V 50-cycle
• Applies: 3" sisal tapes, serging tape, fringe
The PBT is a double puller portable
carpet binder suitable for any carpet edging application. The PBT comes
equipped with a complimentary carry case & supply kit including bobbins,
needles, thread, oil, and a screwdriver.
• Applies tape in One-pass
operation
• Binds all carpets and rugs
• Fully enclosed heave-duty
motor
• Available in either
• 110/115V 60-cycle
or
• 220/2230V 50-cycle
• Applies: 3" sisal tapes, Serging tape, fringe
The N-C Portable
Tapestry Machine is
the only true double puller Tapestry Machine, industrialized
to handle
dense carpets. The PBTT
applies wide borders with
a
hidden stitch (blind stitch). Now you can perform tapestry jobs
onsite.
• Applies up to a 6 inch border
• Independently driven double pullers
• Can perform mitered corners.
• Can utilize any tapestry style tape: leather,
cotton, vinyl, etc.
Powered by 3 independently clutch driven pullers +
front feeder.
The N-C Millennium 4x4 is three times faster than other conventional bobbin type
portables. So go ahead, throw away your bobbins and bind 1000's of feet without
changing thread.
• Bobbin-less, Twin Puller,
Chain-lock Stitch
• Uses 2 large spools of thread
• Accommodates Serging Tape,7/8",11/4"
& 3 inch binding
• Generates 23’ per minute(1380’ per hour)
on Cove Base
• Binds any ROOM-SIZE carpet at a rate of
16’ per minute
Take the new N-C Portable Serger on
the jobsite and serge on the floor. The NCPS comes equipped with our
special tape underlay feature. This tape feature ensures that carpet
pile never busts through the serge. Thus providing a perfect, long
lasting finish. The NCPS is designed to last a lifetime & requires
minimum maintenance.
•
The NCPS works
on any weight Carpet
•
Extra heavy duty design
•
Large stabilizing rubber
casters
•
Carpet pile will never bust
through your serge
•
Two thread wrap
around serge.
•
3/8" width serged edge.
•
Twin puller driven
•
Life long lasting machine
NC Table Models:
All
NC Carpet Table Model Machines come equipped with a complete table,
motor, and stand workstation.
NC has introduced
the 80800RFC into our "Ultimate Cornering Series". This machine takes our
extra heavy duty "Humvee" binder and combines it with the ability to
sew inside turns, inside circles, & acute angles. This unit is complete
with a top & bottom driven rear puller. There is no machine that can
match the 80800RFC's industrial & turning ability.
• Equipped with close couple rear
puller
• NC "Ultimate Cornering" Technology
• Bobbin-less, Chain-lock Stitch
• Longer lasting customized parts
• Equipped with 11/4" Tape Guide
• Bind up to 7" Tape with this machine
Now you can
miter corners perfectly in just seconds!! N-C’s engineering
department has created the 81200SM to perfectly miter corners using N-C 3”
cotton or polyester tape with no skill required. Air Tables are
required in the use
of the mitering operation.
• Heavy Duty Independently Driven
Top &
Bottom Rear Puller
• Independent Clutch Driven Front Puller
• Ability to use 7/8" to 7" Regular Binding
• Bobbin-less
• Binds standard tapes
• Mitering of wide tapes
• 1/2 HP Table Motor Stand
The 81200S
is the world's most industrial
carpet binder. The Humvee was developed
in
1998 to combat tough sisals, Berbers, etc...This double puller, bobbinless
machine is able to bind any carpet effortlessly. If your workroom is
flooded by tough, thick back back carpets, the "S" is your best option.
•
Top & bottom rear clutch
driven puller
•
32 feet per minute
•
Applies binding tape up to 7
inches.
•
Standard with 11/4 tape folder
•
Bobbin-less, Chain-lock stitch
•
Extra Heavy Duty Parts/Machine
Design
•
Positive Non Slip Feeding
•
Definite no-slip feeding
The SB is the most advanced carpet cove base binder in the world. The NC
SB is a bobbinless, self-oiling machine that generates 60 feet per
minute of bound carpet base. The customized adjustable cove base width
guide installs in seconds assuring an even feed and minimal labor.
• Bobbin-less, self oiling,
chain-lock stitch
• Longer lasting parts
• Binds 3600 feet per hour
• Built in puller for faster positive feed
• Extra-wide feeder for superb pulling power
• 1/2 HP Table Motor Stand
The TPB binds up to 3 inches, applies
fringe, and sews on serging tape. The NC TPB is a bobbin-less, self oiling machine
that requires only minimum maintenance and binds 4-5 times faster than
conventional portable binders. Powered by 2 independently driven clutches.
• Bobbin-less, Chain-lock Stitch,
Self Oiling
•
Longer lasting customized parts
• Quick Change attachments
• Attachment reduces tape puckering.
• Rear puller is top and bottom feed;
• Extra wide puller
• 1/2 HP Table Motor Stand
The BAC is
capable of binding tough inside 90 degree angles, inside radiuses, and
180 degree turns with ease. The BAC is traditionally designed for
aircraft, sea-craft, and automat applications. The BAC is
ideal for: Automats, Seacraft,
Aircraft, bathmats.
• Bobbin-less, self oiling,
chain-lock stitch
• Binds at a rate of 35 feet per minute
• Standard 11/4 attachment
• Positive, non slip feeding
• Available automated for sample mats.
• Model: SBA-binds & cuts automatically
• 1/2 HP Table Motor Stand
The programmable, automated SBA applies binding tape to all four edges
of any carpet sample and cuts the tail in seconds. The laser eye
immediately picks up the sample and is ready to sew. The operator simply
taps the pedal and turns the sample. The machine will do the rest.
• Automated Sample Maker (Bobbinless)
• Bind samples without changing thread.
• Easy to program motor
• Self oiling, chain-lock stitch,
• Binds 3600 feet per hour
• Built in puller for faster positive feed
• Extra-wide feeder for superb pulling power
• 1/2 HP Table Motor Stand
If you're
looking for the perfect machine to apply a variety of wide borders, you've
just found it.
The flagship N-C Tapestry machine is capable of applying an 8 inch, blind
stitch tapestry border.
The TAP is bobbinless, self oiling, and requires minimal maintenance. This
unit allows you to perform hand mitered corners to your specifications.
•
Perform hand mitered corners
•
Bobbinless
•
Self oiling
•
Sew up to an 8 inch border
•
Apply a variety of wide
borders
•
Requires minimal maintenance.
The 81200AIR
carpet serger is built on the lifelong lasting 81200 class series machine.
The all new technology allows you to serge those tough inside 90 degree
angles, plus inside circles, and acute angles effortlessly.
Specifically designed with the aircraft, automat, & sea-craft industries
in mind.
• Lifetime 81200 series mainframe
• Increased maneuverability ranges
• Two thread machine
• Wrap around 3/8 " Serged edge
• Single top and bottom feed
• Minimal maintenance.
• Designed for multiple daily shifts
The 81200AIR-RF is designed for the standard carpet serging workroom. If
you serge area rugs for the home, and are looking for a machine to
tackle those tough corners, you've just found it. Designed with a rear
puller to handle dense, room sized carpets.
• Lifetime 81200 series mainframe
• Ultimate cornering technology
• Increased maneuverability
• Two thread machine
• Wrap around 3/8 " Serged edge
• Top and bottom driven rear pullers provide
• Non-slip double puller technology
• Designed for multiple daily shifts
The NC81200
Series Carpet Serger can be set up to meet your workroom requirements:
With 2 or 3 threads, with a rear puller, with tape underlay, and any other
feature you'd like to have. The 81200 is now available as a Portable
Serger.
• Lifetime 81200 mainframe
• Three thread machine
• 3/8 " Serged edge
• Single puller/ feed mechanism
• Independent clutch system
• Minimal maintenance.
• Designed for multiple daily shifts
• Ideal for air, sea, RV, bathmat usage.
The 81200TPWA/B is a lifetime machine capable of serging any weighted
carpet. It's designed to provide a gorgeous wrap around serge while
simultaneously applying a tape underlay. The tape underlay is vital as it
never allows carpet pile to bust through and also eliminates the need to
bevel.
• Carpet pile never busts through
•
Two thread machine
•
Wrap around 3/8 " Serged edge
•
Top and bottom driven rear pullers provide
•
Non-slip double puller technology
• 2
independent clutch system
•
Designed for multiple daily shifts
NC Tools:
N-C set the standard for designing quality and durable carpet carvers,
Shears and precision NC Cutters. NC Tolls are portable units designed
for the carpet installer made in the USA and with you in mind.
The N-C Portable Beveler trims
the edge of thick
piled carpet on exact height and angle. Easily adjustable, the Beveler is
mounted on casters, thus enabling you to bevel an area rug in seconds.
It is also utilized to fabricate custom carpets, and inlay work.
• Portable caster wheels for easy
rolling
• Extra long lasting blades
• One pass shearing...no need to go over
• Convenient carry handle - 30 pounds
• Blades easily removable for sharpening.
• 1/2 HP engine
1) The RSWS is the
world's only 6" single blade cutter. This unit is unique in that it is
capable of cutting any carpet thickness. The RSWS is mounted on casters
therefore the NC RSWS is able to roll easily along the floor or can be mounted stationary. This
American made unit is equipped with a self sharpening blade system that
eliminates downtime. More Information
2) RSWSH has an added walk behind handle. If
you're looking
to set up a track system in your workroom, this unit
will cut your carpet in seconds. The walk behind handles brings the
controls to your fingertips. The handle feature lets you cut carpet
without getting
on our hands and knees.
More Information
NC 467-BS01
Model
467BS-01
Features:
N-C's
electric carpet carver Model
467BS-01 comes complete with a 5 gallon vacuum. This portable unit comes
complete with N-C's " Comfort Grip " Technology. Our most popular
carver, the 467 is utilized worldwide by the industry's master carvers.
•
Complete with heavy duty
vacuum, coil
hose, fittings, & motor •
Vacuum system eliminates mess •
Lightweight carving heads •
Special rug-carving blade; •
Long lasting USA Made blades.
(C129C) •
Heavier Duty rocker arm •
Pivot pin and drive cable
The PDC-3a1 is made entirely in the USA
and is designed to withstand multiple daily shift use. It is
unquestionably the world's most rugged, powerful design carver in the
industry. The PDC-3a1 requires minimal maintenance and of course boast
the "N-C Comfort Grip" technology.
• Comfort Grip Technology
• Lightweight design
• Longer lasting Rocker Arm Bearing
• BUILT IN tubes, all enclosed design
• Eliminates operator discomfort
• Ultimate in maneuverability
• 60 PSI
1) The NC360 is the finest battery powered handheld
portable cutter in the industry More Information.
2) N-C's compact PC2
cutter weighs less than 5 pounds and cuts any weight carpet. More Information
3) Weighing only 2 pounds,
the PNUC hand held cutter is able to cut any rug with ease More Information
Its ease of handling these NC portable cutters are a great compliment to
any installer either on the jobsite or in-house.
NC 250
N-C 250 Features:
The all new NC250 carpet
cutter allows you to cut 6 four inch
strips one pass. The blades are easily adjustable and removable,
thus allowing you to generate strips at a maximum of 24 inches.
Above all else, your knees and back will thank you.
• 6 easily adjustable blades......no
spacers!
• Cuts 6 four inch strips in one pass
• Portable lawn mower style cutter
• Handle denser commercial graded carpet
• Customized - can Cut 9 Strips at a Time
NC Upholstery &
Netting Machines:
Our netting machinery differentiates itself by quite simply minimizing
downtime and part replacement. Designed to last a lifetime.
Capable of attaching any weighted rope to any other weighted net, the
81200NTP also serges netting without rope. It is designed to withstand
multiple daily shift use. Our netting machines are guaranteed to
drastically reduce part replacement cost. 81200NTP is delivered as a
complete workstation which includes the necessary puller to transport the
sewn material.
• Attaches ropes from .080-.625 inch
• Standard installation: for netting sewn
parallel or diagonal to the edge.
• Max. S.P.I. 2.5. stitches: 1200 / minute.
• Top Roller Feed Serging any application
• Variable Speed Feed Roller System
• No Slippage
N-C Netting Machines are extra heavy duty and require minimal maintenance.
This unit applies a finished serged edge to any weight net. Its ability to
serge the most industrial nets makes this machine a must for workrooms
that strictly serge netting. i.e. safety, sport, fishing, etc This unit
comes set up on a complete table workstation. .
• Unique Top Roller Feed Serging All
Ends
• Made Specifically For Netting Industry
• Variable Speed Feed Roller System
• No Slippage
• Minimum Maintenance
The NC206 is a single needle, walking
foot sewing machine utilized by upholstery shops. This unit is perfect
for our customer for the Auto, Aircraft, Marine, and RV industries. It's
able to sew items ranging from auto seats to aircraft life rafts. The
NC206 allows you to sew all leathers, seats, cushions, etc...Complete
with a back tack lever, it's able to sew in reverse.
• Complete table, motor, stand
workstation
• large bobbin 30 inch inside sewing bed
• Horizontal axis hook
• Up to 3 stitches per inch
• Standard feet and attachments
The industry's only self oiling Twin needle
walking foot machine is designed y NC to sew leather
and upholstery goods. They
are usually ordered in 1/4"or 3/8"Needle Gauge. Marine, Aircraft, Auto,
and Awning industries traditionally utilize these machines for their
interior sewing needs.
• Complete table, motor, stand workstation
• Large Bobbin machine
• Back Tack Lever
• Extra high lift
• Compound walking foot design
• Standard parts availability
The NC206 is a single needle, walking
foot sewing machine utilized by upholstery shops. This unit is perfect
for our customer for the Auto, Aircraft, Marine, and RV industries. It's
able to sew items ranging from auto seats to aircraft life rafts. The
NC206 allows you to sew all leathers, seats, cushions, etc...Complete
with a back tack lever, it's able to sew in reverse.
• Complete table, motor, stand
workstation
• Single Needle Walking Foot, large bobbin
• Able to sew light to heavy duty materials
• Self Oiling
• Bobbin Winder included
• Heavy duty frame & design
NC TAPES: N-C Binding tapes, Yarns & Fringes make the most gorgeous
finish in the industry.
Order On-Line
& Choose from Binding Tapes, Serging Yarns and Fringe Styles
•
Binding
tape color charts
N-C Carpet has the world's largest selection of
cotton and polyester binding tapes available in sizes from 3/4" to 3".
•Cotton serging yarn charts
N-C serging yarn provides the most elegant border to
NY carpet styles, oriental fringe, runners, Berbers and more....N-C 100%
cotton serging yarn is available in over 126 absolutely gorgeous
colors..
•
Oriental fringe Styles
Our new oriental fringe chart offers 11 gorgeous
styles. N-C's new fringe is available in cotton and synthetic. N-C
professional carpet fringe is available in many colors and ready to ship
immediately.
WHY NC:
At N-C we take pride in being the industry
innovator. Since 1953, we've pioneered the flooring trade with new
equipment.
Value Statement:
We will continue to design and
develop revolutionary, quality made machinery. N-C differentiates
itself from others by simply designing and manufacturing our own carpet
binding equipment. Others duplicate, at NC we originate.
More reasons why
1) Machines that look
like N-C Machines usually are. We allow others to private label our equipment.
2) N-C Machines are equipped with longer
lasting parts designed to last a lifetime.
3) N-C has the worlds largest supply of
tapes, fringes, yarns & supplies in stock & on-line.
