Model 80800RFC
 "Extra-Heavy-Duty Ultimate Cornering Binding Machine"
 ALL NEW PRODUCT LAUNCH 2009
NC's ULTIMATE HUMVEE
Ultimate Cornering + Xtra Heavy-Duty

Features & Options • Ultimate Humvee Surfaces 2009 • Order Model 80800RFC • Supplies for 80800RFC

NC has introduced the 80800RFC into our "Ultimate Cornering Series". This machine takes our extra heavy duty "Humvee" binder and combines it with the ability to sew inside turns, inside circles, & acute angles. This unit is complete with a top & bottom driven rear puller. There is no machine that can match the 80800RFC's industrial & turning ability.
 
   

 

Model SBA
"Automated Sample Mat Machine"
• Features & Options • Order Model SBA • Supplies for Model SBA

The programmable, automated SBA applies binding tape to all four edges of any carpet sample and cuts the tail in seconds. The laser eye immediately picks up the sample and is ready to sew. The operator simply taps the pedal and turn the sample. The machine will do the rest. All four sides will be perfectly bound and cut. An average operator will complete over 1900 samples in an 8-hour work day. These machines are designed to withstand multiple daily shift use.
 
   

   
 

Model 81200SM
"Mitered Corners Machine"
• Features & Options • Order Model 81200SM • Supplies for Model 81200SM • 81200SM Parts Book / Manual

Now you can miter corners perfectly in just seconds!!

N-C’s engineering department has created the 81200SM to perfectly miter corners using N-C 3” cotton or polyester tape with no skill required. Air Tables are required in the use of the mitering operation.
 
   

   
 

Model P3
PORTABLE BAG CLOSER

One thread, one needle, one looper; chain stitch

The world's leading portable bag closer is able to close feed backs, coffee bags, etc...

This unit is fast, efficient and utilized exclusively by our Nation's largest feed/coffee bag closing operation.

Features-Options  / Order supplies On-Line
 

Click here for more information, pictures, & pricing on NC Model P3

   
 

Model 206N
"Portable Rubber Nosing Machine"

The 206N is the world's only portable machine that applies rubber nosing to commercial carpeting.

It is a take on the job heavy duty unit weighing only 85 pounds. Set up on wheels, this unit rolls along the side of the carpet / runner and applies the nosing.

Features-Options  / Order supplies On-Line

 

Click here for more information, pictures, & pricing on NC Model 206N

   
 

Model 81200AIR
"Serges Tough Angles with ease"
• Features & Options • Order 81200 AIR • Supplies for 81200 AIR • 81200AIR Parts book / Manual

The 81200AIR carpet serger is built on the lifelong lasting 81200 class series machine. The all new technology allows you to serge those tough inside 90 degree angles, inside circles, and acute angles effortlessly. Specifically designed with the aircraft, automat, & sea-craft industries in mind, the AIR lends to all applications. If your workroom encounters difficult carpets to serge, the N-C TOP GUN is your solution.
 
   

 

Model 81200AIR-RF
"Serge sharp angles with ease"
• Features & Options • Order 81200AIR-RF • Supplies for 81200AIR-RF • Parts Book / Manual 81200 AIR RF

The 81200AIR-RF is designed for the standard carpet serging workroom. If you serge area rugs for the home, and are looking for a machine to tackle those tough corners, you've just found it. Designed with a rear puller to handle dense, room sized carpets, the 81200AIR-RF is built on the lifelong lasting 81200 class machine. All new technology allows you to serge those tough inside 90 degree angles, inside circles, and acute angles effortlessly.
 
   

 

Model FTW
Fringes on top, tapes on
back in one operation

The FTW applies press fringe in one operation. Thus, cutting down labor cost and time loss. This unit is bobbinless, self oiling, and built to last a lifetime.

A precision-engineered compound feed eliminates "pucker" or "saucer" effects. Two needles and loopers guarantee maximum fringing security. The folder guide virtually eliminates operator handling, and a convenient swing-away guide makes finishing effortless.

Features-Options  / Order supplies On-Line

 

Click here for more information, pictures, & pricing on NC Model FTW

 

Model TG
 Tufting Gun

The NC Tufting gun is precision made, high-speed, light weight, versatile, maneuverable are just a few words to describe this engineering marvel which virtually out-dates all other tufting machines.

Hand-tufted carpets can be produced at unbelievable speeds with the utmost accuracy. Limited only by imagination, carpets can be created in various heights, in either cut of loop pile of light, heavy, or unconventional yarns. With complete maneuverability, tufting can be in any direction including work in line, twisted movements, or circular work of 360 without removing the cut from the canvas.

Features-Options  / Order supplies On-Line
 

Click here for more information, pictures, & pricing on NC Model TG

 

Model: 320-BR - Rug Braider
 One Thread, One Needle, One Looper, Chain Stitch

The NC320-BR is our heavy duty zigzag lockstitch machine engineered for braiding rugs of any size. If you're in the business of braiding rugs, this unit will provide you with a lifetime of worry free sewing.

The 320-BR offers a wide variety of presser foot sizes, accommodates different size ropes and uses prewound bobbins.

Features-Options  / Order supplies On-Line

 

Click here for more information, pictures, & pricing on NC Model 320BR

   
 

Model 81200NTP
Single Needle Three-Thread
Over-edge Netting Machine

• Features-Options  • Order supplies • Order Model NC281200NTP

Capable of attaching any weighted rope to any other weighted net, the 81200NTP also serges netting without rope. It is designed to withstand multiple daily shift use. Ideal for safety, sport, fishing...ALL netting applications. Our netting machines are guaranteed to drastically reduce part replacement cost & downtime.

The machine is delivered as a complete workstation which includes the necessary puller to transport the sewn material.
 
   

   
 

Model 81200TF
All New
Heavy Duty Netting Serger

• Features-Options  • Order supplies • Order Model NC81200TF

N-C Netting Machines are extra heavy duty and require minimal maintenance. This unit applies a finished serged edge to any weight net. Its ability to serge the most industrial nets makes this machine a must for workrooms that strictly serge netting. i.e. safety, sport, fishing, etc This unit comes set up on a complete table workstation.
 
   

   
 

Model 860N
Single Needle Three-Thread
Over-edge Netting Machine
 

All New High Speed Serger for Light to Medium Weight Netting. The NC Model 860N machine can be delivered only as a complete workstation which includes the necessary puller to transport the sewn material.

Features-Options  / Order supplies On-Line
 

Click here for more information, pictures, & pricing on NC Model 860N

   
 

Model 81200NTPB
Single Needle Three-Thread
Over-edge Netting Machine

NC offers a single needle chain-lock with top & bottom rear puller including a close couple top roller feed puller with the ability to utilize binding up to 7" in diameter.

NC offers the most powerful quality built heavy duty
netting binder in the world. The 81200TPNB is capable of binding around any netting while inserting rope at the same time and is also able to bind netting that already has the rope attached.

Features-Options  / Order supplies On-Line

 

Click here for more information, pictures, & pricing on NC 81200NTPB

   
 

Model TAP
 Tapestry Binder
• Features & Options • Order Model TAP • Supplies for Model TAP • TAP Parts Book / Manual

If you're looking for the perfect machine to apply a variety of wide borders, you've just found it. The flagship N-C Tapestry machine is capable of applying an 8 inch, blind stitch tapestry border. The TAP is bobbinless, self oiling, and requires minimal maintenance. This unit allows you to perform hand mitered corners to your specifications. (by-hand mitered corner video available).
 
   

   
 

Model 81200SM
"Mitered Corners Machine"
• Features & Options • Order Model 81200SM • Supplies for Model 81200SM • 81200SM Parts Book / Manual

Now you can miter corners perfectly in just seconds!!

N-C’s engineering department has created the 81200SM to perfectly miter corners using N-C 3” cotton or polyester tape with no skill required. Air Tables are required in the use of the mitering operation.
 
   

   
 

Model NC206RBL
"30 Inch Long Arm Compound Walking Foot"

• Features-Options  • Order supplies  • Order Model NC206RBL

Our 30" long arm Compound Walking foot machine boasts the largest throat in the entire industry. The Competitor's machines pale in contrast as their machines only allow up to a 25" throat and are more expensive. Seat, upholstery, tarp, awning, and canvas manufacturers in the Marine, Aircraft, Auto, & Awnings industries traditionally utilize these NC machines for their interior sewing needs.

 
   

   
 

Model NC206RB
Single Needle Walking Foot

• Features-Options • Order supplies • Order Model NC206RB

The NC206 is a single needle, walking foot sewing machine utilized by upholstery shops. This unit is perfect for our customer for the Auto, Aircraft, Marine, and RV industries. It's able to sew items ranging from auto seats to aircraft life rafts. The NC206 allows you to sew all leathers, seats, cushions, etc...Complete with a back tack lever, it's able to sew in reverse.
 
   

   
 

Model NC211RB
Double needle compound walking foot

• Features-Options  • Order supplies On-Line • Order Model NC211RB

The industry's only self oiling Twin needle walking foot machine is designed y NC to sew leather and upholstery goods. They are usually ordered in 1/4"or 3/8"Needle Gauge. Marine, Aircraft, Auto, and Awning industries traditionally utilize these machines for their interior sewing needs.
 
   

   
 

Model : NC305L
" 21inch Long Arm Zig -Zag Compound
Extra High Lift Walking foot"

This single needle long arm walking foot is utilized by sewers that require additional in depth sewing.

For example, if you need to sew an inside circle 20 inches into your sample, this Model: NC305L unit permits this application. The Marine, Aircraft, Auto, Awnings, Upholstery Industries etc. traditionally utilize these machines for much of their interior sewing needs.

Features-Options  / Order supplies On-Line

 

Click here for more information, pictures, & pricing on NC Model 305L

   
 

Model PBTT
 Portable Tapestry Binder
• Features & Options • Order Model PBTT • Supplies for Model PBTT

Tapestry edges have become prevalent in our industry. Demand for these gorgeous 3” – 6” tapestry borders has grown dramatically. Now you can perform tapestry jobs onsite.

The N-C Portable Tapestry Machine is the only true double puller, industrialized to handle dense carpets. The PBTT applies wide borders with a hidden stitch (blind stitch).
 
   

   

NC Carpet Binding, carpet binder, carpet binding machine, carpet binding tape, rug tape binding, cotton binding tape, polyester binding tape, rug binding, portable binder, Serging Machines, bobbins, needles, threads, oil, sewing, loopers, binding machine, industrial sewing machine, n-c portable binder, carpet serger, serging machine, portable serger, carpet cutter, cove base cutter, Carpet shear, carpet beveler, carpet carver, sisal tape, wide border tapes, oriental fringe, carpet fringe, synthetic tassels, tapestry, tapestry, serging yarn, serging tape, serge, whipping, serging, serging thread, cotton threads, national carpet equipment, upholstery machine, walking foot, eagle parts, turf machine, turf sewing machines, national carpet equipment, bond products, netting machine, rubber nosing machine, aircraft interiors, seacraft interiors, marine interiors, automats, nosing, entrance mats, rubber nosing, sewing machine, butt seam, sewing machine parts, auto upholstery, glue guns, design carver, 467, pdc, nc05, bobbinless, cove base, rug braiding, tufting gun, N-C Carpet Binding has he world's largest On-Line selections of binding tapes, serging Yarns & Fringes. Quality N-C Binders, Sergers & custom equipment made in USA, ..

N-C Approved Websites • Turf Sewing Machines • Netting Machinery • Quality Sewing Machines
© 2005-2009 N-C Binding & Equipment Corp. All Rights Reserved

 Designed & Maintained by Demetrios Sales Co